Caterpillar D5 Dozer

Caterpillar's D5 dozer, which replaces the D6N, features a fully automatic transmission for seamless acceleration and a 170-hp engine for the power and responsiveness to complete dozing and fine grading.
 

• Fully automatic 3-speed transmission with lock-up clutch
• Weight range: 37,875 to 42,263 lb.
• Redesigned cab with multiple seat and control adjustments
• 10-in. touchscreen operator interface
• Standard High Definition rearview camera
• 15% more cab glass area
• Hood angle provides 30% better forward visibility to blade and worksite (compared to D6N)
• Factory integrated Cat GRADE with 3D
• Advanced Inertial Measuring Units (IMU) provide greater speed and accuracy without position sensing cylinders
• Smaller antennas integrated into the cab roof
• GPS receivers mounted inside
• GRADE operator interface works like a smart phone
• AutoCarry automates blade lift to maintain desired blade load, improve load consistency and reduce track slip
• Cat GRADE with Slope Assist provides basic blade positioning assistance without added hardware or a GPS signal
• Cat Slope Indicate is standard, showing the machine cross-slope and fore/aft orientation on the primary monitor
• Factory Attachment Ready Option (ARO) provides optimal mounting locations, brackets and hardware and simplifies installation of an aftermarket grade control system
• Blade Load Monitor gives real-time feedback on current vs. optimal blade load 
• Traction Control detects track slip and temporarily reduces track power 
• Second generation Stable Blade works seamlessly with operator blade inputs for smoother surfaces when grading manually
• Cat LINK telematics technology gathers data generated by equipment, materials and people
• Hill Descent Control maintains preselected machine speed, without using the service brakes, for added control when working downhill
• Hill Hold automatically engages the brakes to hold position when in neutral on a slope
• Decel Brake Pedal controls machine speed all the way to a complete stop, or for smooth inching control
• Steering Radius Control uses steering and decel pedal input to automatically downshift for a tighter turning radius and more maneuverability
• Available in Standard or Low Ground Pressure (LGP) configurations, with either a push arm or Variable Pitch Angle Tilt (VPAT) blade
• Folding VPAT blade is available
• Waste, Forestry/Land Clearing and Fire Dozer configurations offer specialized factory-installed guarding and other features